This product is used for surface priming before the application of structural paints and pastes, decorative plasters, such as stucco, travertine, and decorative concrete. The primer is used for surface reinforcement, absorbability reduction, and adhesion optimisation. The primer is used for surfaces, such as plaster, putty, concrete, gypsum boards, and decorative pastes, etc. For structural pastes on exceptionally difficult surfaces (smooth, non-absorptive), Contact Primer is recommend.
Primer
Description
Instructions for use: The surface should be clean, dry, and stable. Residues of adhesive paints and other peeling-off coatings must be removed. For new lime plasters, wait 3 to 4 weeks before decorative coatings are applied. Surfaces intended for priming should be protected against spatters. Wear working clothes – stains from to the primer are difficult to remove from clothing. The product is ready for use, so do not dilute. Before use, mix carefully. Apply the primer using a roller or a brush. For very absorptive surfaces, apply the primer twice. Once the job is completed, vent the room until the odour is gone.
Storage: Store the product in the original, tight container within a temperature range of 5°C to 30°C. Keep out of the reach of children.
Shelf life: 2 years from the date of manufacture indicated on the container.
Additional information
| Coverage | 6 – 12 m²/l (one layer) |
|---|---|
| Capacity | 3 l |
| Dry to touch | 1 – 3 h |
| Application of another layer | after 3 – 4 h |
| Proper drying | 12 – 24 h |
| Number of layers | 1 – 2 |
| Tool cleaning | warm water with detergent |
| Other | improves adhesion, reinforces the substrate, reduces absorptivity |
