Magnetic Paint lends the wall the properties of the surface of a fridge – it attracts magnets. Its application facilitates decorating walls or ceilings with posters, pictures, photographs, etc. without using drawing pins, glue or adhesive tapes, which destroy and soil a surface. This solution is ideal for children’s rooms, office rooms as an advertisement board and many other applications. It is a grey primer – to obtain full decorative effect, after applying it on the wall it should be coated with the paint in a desired colour. Product can be used on all surfaces suitable for emulsion paints.
Magnetic paint
Description
Directions for use: Stir thoroughly before use. Do not dilute or mix with other paints. Before painting, paint a sample area in order to become familiar with the coating technique. Optimal effect is obtained when using the paint in room temperature. It is recommended to use magnetic paint only on flat surfaces. Apply with a painting roller or a brush, leave for 4 hours to dry and apply the next coat or topcoat. Use acrylic or latex emulsion paint as a topcoat. It is recommended to apply 2-3 coats of magnetic paint, or more in case of poor attraction. The final effect depends on many factors, for example the thickness of a coat, coating technique, tools.
Attention! It is essential to paint a sample on a small surface using specific topcoat paint in order to check the final appearance of the coat and the attractive force. In case of some paints, obtaining this effect may not be possible. Too heavy magnets or too thin layer of paint may reduce the fastening force. Paint can also be coated with thin (non-pressed) wallpaper (3-4 coats of magnetic paint are then recommended). Keep out of the reach of children. Harmful if swallowed. Use only in properly ventilated rooms. Close the container tightly after use. If swallowed immediately contact a doctor and show a package or a label. Eye contact: do not rub; rinse with plenty of water. Avoid contact with skin and respiratory system.
Storage: in closed, original containers, in temperature of 5-35۫C.
See the packaging for the expiry date.
Additional information
| Coverage | 5 m²/l (one layer) |
|---|---|
| Capacity | 0,75 l |
| Dry to touch | approx. 2 h |
| Application of another layer | after 4 – 6 h |
| Proper drying | 12 – 24 h |
| Tool cleaning | water |
| Other | does not contain solvents, ideal for advertisement board, no more drawing pin holes, wall like a surface of a fridge |
